CNC Hydraulic Press Brake – EHP Series

• The electronic scales are fixed on either side of the press beam, providing a continuous feedback to the CNC
unit regarding actual position of the press beam, with respect to the table.
• Machine offers press beam depth accuracy of ±0.01 mm with high repeatability.
• The parallelism between press beam and table is maintained with electronic measuring system Y1-Y2.
• Machine is with direct-angle programming feature. Also is ideal for multiple – angle bending in a particular
profile.
• With Y1-Y2 control the press beam can be used with eccentric load, while bending short length jobs off center
of the machine. This is without affecting quality or accuracy of machine
• Due to use of proportional Hydraulics, the exact force required for the job is calculated by the controller is
exerted thereby resulting in the power saving
• Press beam tilting is available upto ±10 mm for the machine tonnage upto 110 ton and above 150 ton will be
with ±2mm as standard features.
• Machine structure parts are machined in single set up ensuring very high accuracy on parallelism between top
beam & lower table over the entire bed length and high perpendicularity accuracy over the entire stroke length
on upper beam movement with respect to the table length.
• Machine is designed & manufactured to ensure very precise backguage setting through out the length across the
backguage beam.
• Machine offers vibration force movement throughout the stroke length, even at extended dwell time and
increased / reduced speeds.
• Machine can be adapted to different type of tool design i.e. European design, low cost Japanese designmodifix
design.